Autowatch Ghost Immobiliser
The well-known Ghost Immobiliser provides your vehicle with advanced protection against key-cloning hacking, theft and hacking. This TASSA certified system is inaccessible to thieves and blocks the thieves from starting your vehicle.
This silent device makes use of buttons on your vehicles steering wheel, centre console and door panels to permit you to set a unique PIN code that you can change up to 20 characters. The code must be entered before the car can start.
Easy to install
With car theft increasing and cloning equipment readily available it is more important than ever to secure your vehicle. ghost immobiliser provides a discrete, effective and aftermarket solution to protect against key cloning and car theft. It is virtually undetectable by thieves and operates via buttons that are already present in the steering wheel or door panels, as well as the central console. This allows users to create a unique disarm sequence similar to credit card numbers that must be completed before the vehicle can begin or leave. This makes the system almost impossible to detect and is also unaffected by spoofing or jamming devices as used with other systems available.
Installation of the Ghost unit requires a highly-skilled installer. The unit is firmly integrated into your vehicle's CAN bus network, ensuring that it communicates directly with the ECU. This allows the Ghost to be installed without having to alter factory settings and ensures that it can't be hacked by a burglar using signal boosters or other techniques.
After the Ghost is installed, you will need to use a different and more efficient disarming sequence to activate your vehicle. Press the service button 5 times in 2 seconds, but ensure that you don't hold it for too long. The system will flash twice to show that Transport Mode has been activated. This feature is ideal for classic, sports or prestige vehicles that require their security system to be temporarily disabled while transportation or during servicing.
After the Transport Mode is activated the immobiliser will be removed and you will not be able to activate it again by entering the PIN code. This feature is ideal for those who want to store their vehicles over the winter months to protect theft or to avoid having to pay higher insurance rates.
No key-fobs or LED indications to reveal its location
The Ghost immobiliser is a discrete device that shields your pride and joy from car thieves by using buttons on your steering wheel or dashboard to input a discreet pin code prior to the start of the engine. It can be linked to a phone application to arm/disarm remotely. It blocks signal relay, ECU swapping, and key cloning. It is easy to install and can be installed in a wide range of vehicles. It's also very discreet and can be hidden in hard-to-reach places like behind the dashboard, or inside the trim on the steering wheel.
It's a great choice for cars with high performance since it can shut off the vehicle's ignition when the wrong pin code is entered, preventing thieves from stealing your joy and pride. The device can even send an alert to your phone if you've left the car unattended in public, giving you peace of mind while you're away from your vehicle.
In contrast to other immobilisers, the Ghost does not require any additional fobs or LEDs and can be concealed easily in a hard-to-reach place inside your vehicle. It is extremely resistant to detection because it directly communicates with the CAN data network of your vehicle. It also doesn't emit radio signals, making it not detected by RF scanners, or signal jammers.
It is designed to be tamper-proof and weatherproof. It also has the ability to withstand extreme temperatures. It's also not possible to interfere with by cutting the wires or dismantling the unit. what is a ghost immobiliser 's also inaccessible to organized gangs of thieves that use diagnostics reading equipment to identify security systems. It's not affected by professional diagnostic equipment that examines CAN data for the presence or absence of a security system.
No circuit cuts
Without LEDs or key fobs to reveal its location, the ghost device is hidden within your vehicle, underneath the steering wheel or dashboard and uses buttons in your car to create a unique PIN code sequence that must be entered before the engine can be started. The criminal cannot leave the vehicle even when they have keys to your car because they do not know the correct code. The device also doesn't transmit radio signals, meaning that organized criminal gangs that use diagnostics reading devices won't be able to detect the device.
This innovative immobiliser, which is also TASSA-approved can assist you in reducing your insurance costs. This is especially applicable to modified vehicles that their owners have customised. It also prevents key theft and ECU switching, meaning that the only way for a burglar to take your pride and happiness is to tow it away.
As the system does not use the factory key fobs or the dashboard buttons it is a completely silent device, it communicates with your ECU through the CAN data circuit that operates completely silently and does not display any indication that it's installed. This means that thieves can't replace the ECU or even add new key fobs to allow your car started.
If you forget your PIN code our engineers will provide you with an emergency reset for the device that permits you to enter'service mode'. This will allow the technician or dealer to temporarily start and drive your car enabling them to carry out maintenance work, MOTs or valet parking without having to enter the PIN code once more. After the technician has done or you have collected the vehicle then enter the PIN code to exit the service mode.
No radio signals
Unlike many other car security systems, the Ghost immobiliser does not rely on an alarm system or key fobs to block vehicles from getting started. Instead, it communicates with the vehicle's ECU and the CAN data circuit to stop the engine from starting. This makes it a quiet solution that isn't affected by key cloning or RF scanning techniques employed by thieves to circumvent other security devices. It can also be paired with tracking systems to improve the overall safety of your vehicle. It will also alert you to any attempted tampering or theft.
The Autowatch Ghost is a TASSA-certified device that is insurance-approved and provides a superior level of security against key hacking, cloning, and even stealing. It is controlled by a mobile app and is secured with encryption for security. It comes with a secure emergency PIN override. It is an effective cost-effective, private and discreet way to shield your car from theft.
However, the Ghost is not without its problems. Users often have trouble entering the correct sequence of disarming. This is due to the fact that the device requires input through buttons that are already present in your vehicle, such as those on the steering wheel or center console. Users might find this difficult to remember or even miss, especially when the device is being first used. It is advisable to read the instruction manual that comes with the device to understand this and practice the disarming process before driving the vehicle.
Another issue is that some vehicles are experiencing issues with the CAN data connection, which could affect the performance of the Ghost. This could be due to malfunctioning sensors or an damaged OBD port. It is recommended to test the system again prior to using it in case there are any issues with the CAN connection.
It is simple to change the PIN code
The Ghost is a fantastic product that has been a hit on the market. However the process of changing the pin code can be a bit confusing. The device is preprogrammed by installer at the time of installation, but customers might want to alter it for a variety of reasons. For example they may want an alternative button that deactivates the device or not want their installer to be aware. It is also possible that they dislike the pin code they have. It's easy to change your pin number. Follow the simple instructions below to learn how.
Please note that you will have to turn on the ignition but do not start your car! This process only takes a few moments. The vehicle will then return to normal operation.